35KW (30-80kHz) Induction Heating System with Timer Control

Induction Heater

• Working Voltage: 220V AC, 50/ 60Hz, Three Phases ( 380VAC, 3phase available upon request )

• Working Current: 15~110 Amps (125A breaker required)

• Max. Input Power: 35 KW 

• Output Frequency: 30 - 80 kHz 

• Duty Cycle: 80%

• Induction Coil: 150mm(OD) x 140mm(ID) x 65mm(H) 

• Air Cooling: Rear Fan

• Protection: Automatic water pressure, over temperature, and over power protection

• Refractory Assembling: Complete refractory assembling made of alumina, including bottom crucible support, crucible holder, and cover

Timer Control

Automatic timer control or Manual control selectable

• Manual Control: by Foot Pedal

• Automatic Heating Time: 1-99 Seconds

• Automatic Dwell Time: 1-99 Seconds

• Automatic Cooling Time: 1-99 Seconds

Temp. Controller & Thermocouple (optional)

• Precision digital temperature controller with Automatic PID tuning

• 30 segments programmable for controlling heating and cooling rate as well as dwell time.

• Overheating & thermocouple failure protection.

• +/- 3℃ temperature accuracy. 

• +/- 3℃ temperature accuracy. 

• Thermocouple: C type  (1/4"x10"L)

• Continuous Working Temp. Range: 1000℃~1900℃

• Max. Working Temperature: 2000℃ (for less than an hour)

• Max. Heating Rate: 

•  4℃/second (1000℃-1200℃)

• 3℃/second (1200℃~1500℃)

•  1℃~2℃/second (1500℃~2000℃)

Water Cooling

• Flowrate: >10 L/Min

• Pressure: ≥0.2 MPa (29 Psi)

• Tap water is acceptable, but using Recirculating Water Chiller is highly recommended. Protection: Overpressure and over temperature switch

• Water Chiller (optional)

• Temperature range: 5 - 30℃

• Water Flow Rate: > 58 L/m

• Note: It is recommended to use a specific coolant to get the best performance.

Warranty

• One year limited warranty with lifetime support

• Consumable parts such as processing tube, thermocouple, refractory liners, o-rings, and heating coil are not covered by the warranty